Aaon HVAC Unit RN-007-2-0-BA

Has the need for cleaning been confirmed by a qualified service agency?

Has consultation with an AAON Service representative been completed?

Ensure cleaning is performed by a qualified service agency.

Describe any issues identified during cleaning.

Is the unit operating correctly after cleaning?

Ensure the gas supply is turned off before inspection

Ventilate the area to disperse any accumulated gas

Check all connections for leaks

Were any leaks detected during the inspection?

If leaks were detected, were they repaired?

Shut off all electrical power to the unit to avoid shock hazard or injury from rotating parts

Inspect blower wheels and bands for excessive dust build up

Is there excessive dust build up on blower wheels or bands?

Clean blower wheels and bands if excessive dust build up is found

Check for any signs of vibration or component failure after cleaning

Ensure all necessary cleaning agents and tools are available

Verify the availability of approved cleaning agents

Ensure no harsh chemicals, household bleach, or acid cleaners are present

Verify that the cleaning area is clear of any obstructions

Clean the coil with Enviro-Coil Concentrate

Remove any grease or oil film with the approved cleaning agent

Verify that all safety protocols are in place

Inspect the following components for wear and tear

Clean the unit exterior and interior

Is the operating pressure within the normal range?