Xerox Holdings Digital Color Press V180

The following items are the Customer Replaceable Units (CRU) for the press.; It is recommended that you have a supply of these items available to eliminate down time when they need to be replaced.

• Dry Ink/Toner cartridges (C, M, Y, K)

• An empty Waste Dry Ink/Toner bottle

Refer to www.xerox.com for the latest consumable part numbers.

Note: The Fuser Module may be replaced by the customer only if directed to do so by Service.

Note: Store supply items and Xerox parts in their original packages in a convenient location.; Always recycle/dispose the used CRU according to the disposal instructions supplied with the new CRU.

Ordering Supplies: Xerox supplies, paper, and throughput material can be ordered from the web site www.xerox.com and clicking on the Supplies link.; For any item that is not orderable from the web site, contact your Xerox Service Representative.

Before you start to clean the press, be sure to switch off the power using the rear breaker switch and unplug the press.

Cleaning the press without switching off the power may cause an electric shock.

• Always use a dry lint-free cloth for all cleaning actions unless otherwise directed.

• Do not use benzene, paint thinner, other volatile liquids, or spray insect repellent on the press as doing so may discolor, deform, or crack covers.

• If a moistened cloth is used, wipe afterwards with a dry lint-free cloth.; Cleaning the press with an excessive amount of water may cause the press to malfunction and/or damage documents during printing.

- Cleaning the Document Cover and Glass

b) To remove dirt, wipe the document cover with a soft cloth moistened with water and then wipe it dry with a soft cloth.

Before you start to clean the press, be sure to switch off the power using the rear breaker switch and unplug the press.; Cleaning the press without switching off the power may cause an electric shock.

• Always use a dry lint-free cloth for all cleaning actions unless otherwise directed.

• Do not use benzene, paint thinner, other volatile liquids, or spray insect repellent on the press as doing so may discolor, deform, or crack covers.

• If a moistened cloth is used, wipe afterwards with a dry lint-free cloth.; Cleaning the press with an excessive amount of water may cause the press to malfunction and/or damage documents during printing.

- Cleaning the Document Feeder Rollers

1. Gently lift the latch of the document feeder top cover until it is open completely in a fixed position.

2. While turning the rollers, gently clean them with a soft cloth moistened with water.

Caution! Use a cloth that has been thoroughly wrung to prevent drops of water falling into the machine.

Drops of water on internal components may cause a malfunction.

Warning: This procedure requires trained personnel with PPE!

Note: The Fuser Module may be replaced by the customer only if directed to do so by Service.

Note: Store supply items and Xerox parts in their original packages in a convenient location. Always recycle/dispose the used CRU according to the disposal instructions supplied with the new CRU.

Note: The cleaning pads used with the ROS Window cleaning wand are not orderable. Contact your Xerox representative for any additional cleaning pads.

Caution! Do not leave the Drum Cartridge Drawer open for more than one minute. Exposing the drum cartridges to direct sunlight or strong light from indoor fluorescent lighting for more than one minute may cause image quality defects.

Caution! Replace drum cartridges while the press is powered ON.

Ensure that the press is stopped and is not currently printing jobs.

Rotate and turn the R1-R4 Drum Drawer Handle to the unlock position.

Before you start to clean the press, be sure to switch off the power using the rear breaker switch and unplug the press.; Cleaning the press without switching off the power may cause an electric shock.

• Always use a dry lint-free cloth for all cleaning actions unless otherwise directed.

• Do not use benzene, paint thinner, other volatile liquids, or spray insect repellent on the press as doing so may discolor, deform, or crack covers.

• If a moistened cloth is used, wipe afterwards with a dry lint-free cloth.; Cleaning the press with an excessive amount of water may cause the press to malfunction and/or damage documents during printing.

- Cleaning the Drum Drawer Area

When you are replacing a drum cartridge, and before inserting the new cartridge, perform these steps to clean under the drum cartridge area

1. With the Drum Cartridge Drawer open, look for dry ink/toner waste on the bottom of the catch pan under the drum cartridges.

2. Use a clean cloth to wipe down the catch pan.

3. Continue following the instructions on how to insert the new cartridge.;