Welbilt Refrigerator 406-MD2

Remove exterior back with 5/16” nut driver

Condenser Location and Cleaning

Locate condenser on back of unit

Clean condenser using appropriate method

Unplug power cord and move products to walk-in

Check the condition of the door gaskets

Record model and serial number for ordering

Call 1-800-733-8829 to find a local parts distributor

Check if hinge screws need tightening

Is there excessive water accumulation inside the unit?

Is there water collected underneath the unit?

Ensure the drain tube is connected from the evaporator housing to the condensate evaporator drain pan.

Check if the condensate evaporator drain tube is located inside the drain pan.

Is the unit placed on a level surface?

Clean the gasket with warm soapy water

Avoid using full strength cleaning products on the gasket

Ensure no sharp tools or knives are used during cleaning

Remove the old gasket by pulling it out of the groove

Press the new gasket into place in the groove