Stryker Stryker Fluoroscopy Stretcher 1080 1080

WARNING! Always disinfect the mattress between patients. Failure to do so could result in cross-contamination and infection.

Is the mattress clean and dry before applying disinfectants?

Did you wipe down the mattress with a clean, dry cloth to remove any excess liquid or disinfectant?

Did you rinse and dry covers after disinfection?

NOTE! The mattress cover must be dry before you store or add linens. Failure to remove excess disinfectant could cause degradation of the cover material.

Some cleaning agents are corrosive in nature and may cause damage to the product if you use them improperly. If you do not rinse and dry the product well, a corrosive residue may be left on the surface of the product that could cause premature corrosion of critical components. Failure to follow these cleaning instructions may void your warranty.

Frequent or prolonged exposure to higher concentrations of disinfectant solutions may prematurely age the cover fabric.

The use of accelerated hydrogen peroxides or quaternaries that contain glycol ethers may damage the cover.

Warning: Failure to follow these directions when you use these types of cleaners may void this product’s warranty.

Amount of sodium thiosulfate in tablespoons

Stain cleaned as soon as possible?

Solution allowed to soak on the mattress?

Mattress rinsed with clear water before returning to service

Sign off on the iodine removing process

WARNING: Do not clean, service, or perform maintenance while the product is in use.

WARNING: Do not steam clean, hose off, or ultrasonically clean the product. Use of these methods of cleaning is not recommended and may void the product’s warranty.

Followed the disinfectant solution manufacturer’s dilution recommendations?

Hand washed all surfaces of the product with a disinfectant solution?

Avoided over-saturation and made sure that the product did not stay wet longer than the chemical manufacturer’s guidelines for proper disinfecting?

Dried the product and did not place the mattress on the product until the product is dry?

Disinfected the Velcro® after every use. Saturated the Velcro® with disinfectant, rinsed with water, and allowed the disinfectant to evaporate?

Checked functionality before you return the product to service?

WARNING! Do not clean, service, or perform maintenance while the product is in use.

Followed the cleaning solution manufacturer’s dilution recommendations

Hand washed all surfaces of the product with warm water and mild detergent

Avoided over-saturation and ensured that the product did not stay wet longer than the detergent manufacturer’s guidelines for proper cleaning

Did not replace the mattress on the product until the product is dry

Checked functionality before returning the product to service

Locked and unlocked the brake/steer pedal in both positions

Warning: Do not clean, service, or perform maintenance while the product is in use.

Warning: Do not immerse the mattress in cleaning or disinfectant solutions. Excess moisture could cause product malfunction that results in product damage or patient injury.

Warning: Do not allow fluid to pool on the mattress. Fluids can cause corrosion of components and may cause the safety and performance of this product to become unpredictable.

Inspect mattress covers for tears, punctures, excessive wear, and misaligned zippers.

Warning: Do not steam clean, pressure wash, hose off, or ultrasonically clean mattresses. These methods of cleaning may void the product’s warranty.

Note: The life of the mattress can be affected by an increase in frequency of usage, which might include more frequent cleaning and disinfection.

Wipe down the entire mattress with a mild soap and water solution to remove foreign material.

Wipe down the mattress with a clean, dry cloth to remove any excess liquid or cleaning agents.

Rinse and dry covers after cleaning.