SATO Printer M-8465Se

Apply SATO Thermal Print Head Cleaner to a cotton swab

Clean the Label Pressure Rollers

Open the Label Hold-Down by disengaging the latch

Apply SATO Thermal Print Head Cleaner to one of the cotton swabs

Use the cotton swab to clean any foreign matter from the exposed surface of the sensors

Check the roller on the Paper End Switch for residue

Clean the roller on the Paper End Switch if necessary

Close the Label Hold-Down and secure the latch

Open the Print Head Assembly by pushing the Head Latch toward the rear of the printer

Apply SATO Thermal Print Head Cleaner to a cotton swab

Pass the end of the dampened swab along the entire width of the Print Head

Check for any black coloring or adhesive on the swab after cleaning

Repeat cleaning if necessary until the swab is clean after it is passed over the head