Mitsubishi Air Conditioner PEFY-P96NMHSU-E

Warning: Exercise caution when removing heavy parts.

Remove the two fixing screws on the cover (A)

Upload a photo of the control box without the cover

Sign off on the control box disassembling

Warning: Ensure to drain the water out of the drain pan before removing it.

Removed the twelve fixing screws on the bottom plate (L)?

Pulled out the drain pan (M) in the direction of the arrow?

Sign off on the drainpan disassembling

Exercise caution when removing heavy parts.

1. Remove the control box cover according to the procedure in section 1. Control box.

2. Removing the maintenance cover (1) Remove the ten fixing screws on the cover (D) , cover (E) , and cover (F) to remove the maintenance cover.

(1) Disconnect the connector (CN44) from the Indoor controller board.

(2) Remove the thermistor (G) from the thermistor holder (H)on the copper tube.

Exercise caution when removing heavy parts.

1. Remove the control box cover according to the procedure in section 1. Control box.

2. Remove the maintenance cover according to the procedure in section 3. Thermistor (Gas pipe) (Liquid pipe) · LEV.

3. Remove the thermistor and disconnect LEV connector according to the procedure in section 3. Thermistor (Gas pipe) (Liquid pipe) · LEV.

4. Remove the drainpan according to the procedure in section 4. Drainpan.

5. Removing the Heat exchanger.

(1) Remove the four fixing screws on the heat exchanger (N) to remove it.;

Exercise caution when removing heavy parts.

1. Remove the control box cover according to the procedure in section 1. Control box.

2. Disconnect the connector (CN20) from the Indoor controller board.

3. Pull out the thermistor holder (B) and thermistor (C) on the control box.;