Loren Cook Company Centrifugal Exhauster ACE 245

Inspect bolts and setscrews for tightness

Tighten bolts and setscrews as necessary

Inspect belt wear and alignment

Replace worn belts with new belts

Adjust belt alignment as needed

Inspect bearings as recommended in the Conditions Chart

Inspect motor nameplate for lubrication instructions

Determine lubrication interval based on service conditions

Select compatible grease for lubrication

Lubricate motor bearings with selected grease

Inspect, clean, or repair bearings as needed

Record any issues or observations during lubrication

Sign off on completed lubrication procedure

Are there any specialized lubrication instructions on the fan labels?

Ensure the fan is in operation before lubricating

Is the bearing visible during lubrication?

Number of grease injections used

Pump grease slowly until a slight bead forms around the bearing seals

Inspect motor nameplate for lubrication instructions

Determine if motor bearings have provisions for relubrication

Check for severe application conditions

Select lubrication interval based on service conditions

Use compatible grease for lubrication

Inspect, clean, or repair bearings as needed

Refer to diagram for inspection, cleaning, or repair

Check for lubrication instructions on motor nameplate

Is the motor bearing provided with provisions for relubrication?

Disassemble motor bearings for lubrication

Select compatible grease for lubrication

Lubricate motor bearings with selected grease