Life Fitness Flat Bench O-FB

Warning: Use standard, non-abrasive, wax finish for waxing frames.

Type of polishing compound used

Remove shoe scuffs from powder coated surfaces

Sign off on the bench maintenance

Inspect Hardware. Check for loosening. Tighten as required.

Inspect Frames. Inspect for wear and damage.

Inspect Handgrips. Check for wear and damage.

Inspect all accessories, connecting links, and carabiner clips for wear.

Clean Hand Grips with an approved or compatible cleaner

Inspect for paint chips. Fill in immediately with HAMMER STRENGTH touch-up paint

Visually inspect all hardware for loosening, tampering or wear

Wash the unit with approved or compatible cleaners using a clean sponge or a soft cloth

Dry thoroughly with a chamois or moist cellulose sponge to prevent water spots

Remove fresh paint splashes, grease and smeared glazing compounds before drying by rubbing lightly with isopropyl alcohol

Perform a warm final wash, beginning with a mild soap or detergent solution and ending with a thorough rinsing with clean water

Clean Upholstery with an approved or compatible cleaner

Inspect Belts. Look for wear or damage and proper tension. Pay close attention at bends and attachment points

Wipe down upholstery with a mild soap and water or comparable all purpose cleaner

Visually inspect belts for wear at and around connections and along the entire length of the belt. Always replace at first sign of wear

Wash the unit with approved or compatible cleaners using a clean sponge or a soft cloth. Rinse well with clean water

Dry thoroughly with a chamois or moist cellulose sponge to prevent water spots

Fresh paint splashes, grease and smeared glazing compounds can be removed easily before drying by rubbing lightly with isopropyl alcohol

Afterward, a warm final wash should be made, beginning with a mild soap or detergent solution and ending with a thorough rinsing with clean water