The John Deere Tractor 5045E is a versatile and reliable agricultural asset designed for various farming tasks. Known for its robust performance and efficient operation, this tractor model is ideal for both small and large-scale farming applications, ensuring productivity and durability in the field.

Turn manuals into instant answers
with your AI-powered assistantTurn manuals into instant answers
with your AI-powered assistant

PDF MANUAL

Manual for John Deere Tractor 5045E

MAINTENANCE RESOURCES

Complete asset maintenance, one click away

Get instant access to all the maintenance information you need. Empower technicians to perform preventive maintenance with asset packages, ready to use right out of the box.

Documents & Manuals

Find all the essential guides in one place.

Tensioning Guide
Belt-diagram
C-120 pulleys
+ 13 more

Work Order Templates

Pre-built workflows to keep your asset running smoothly.

Daily Electrical System Inspection
Replace Roller and Pulley
Install Engine B-120
+ 29 more

Procedures

Integrate maintenance plans directly into your work orders.

Motion Industries
Applied Industrial Technologies
Electrical Brothers
+ 5 more

Parts

Access the parts list for your equipment in MaintainX.

Drive Motor
B2 Rollers
Tensioning System
+ 40 more

John Deere Tractor 5045E

Create an account to install this asset package.

Maintenance Plans for John Deere Tractor Model 5045E

Integrate maintenance plans directly into your work orders in MaintainX.

100 Hourly Tractor Maintenance

Transmission-hydraulic oil filter replaced?

Engine break-in oil and filter changed?

Hose clamps on the air intake system inspected?

Hose clamps on the coolant system inspected?

Sign off on the tractor maintenance

Run this procedure

10 Hourly / 1 Daily Tractor Maintenance

Check engine oil level

Check coolant level

1. Raise hood.

2. Check level in coolant reservoir (A) BEFORE starting tractor.

3. If engine is COOL and level is below MIN COLD mark, remove cap and add coolant to reservoir to bring level between MIN and MAX COLD mark.

4. Install cap and lower hood.

Drain water and sediment from fuel tank and fuel filter

Fuel filter:

1. Disconnect wiring harness connector (A). 2. Connect a small hose to end of the drain plug (B). 3. Place a suitable container under drain. 4. Open drain plug (B) to drain moisture and sediment from the fuel filter (C). 5. Tighten drain plug (B) when fuel runs clear. 6. Remove drain hose and connect wiring harness connector (A). Fuel tank:

Run this procedure

1200 Hourly Tractor Maintenance

Change transmission-hydraulic oil and filter

1. Lower rockshaft to remove trapped oil.

2. Remove drain plug (A) from transmission case and drain out oil. Dispose of waste oil properly.

3. If equipped with the MFWD axle, also remove drain plug (B) in the drop housing.

4. Replace oil filter (C) while changing oil. Apply a film of oil to the new filter gasket and install new filter. Hand tighten only.

5. Fill system with transmission-hydraulic oil. (See Fuels, Lubricants, and Coolant section.)

6. Check oil level at dipstick (D) or sight glass (If equipped) after filling, and again after operating for five minutes.

Clean transmission-hydraulic pickup screen

1. Drain transmission-hydraulic oil. (See Change Transmission-Hydraulic Oil and Filter in this section.)

Run this procedure

1 Yearly Tractor Maintenance

Replace air cleaner elements

Inspect seat belt

Replace operator enclosure/cab air filters

Replace Engine Air Intake Filters

1. Raise hood.

2. Release Latch (B) and remove Cover (C) from sideways.

3. Rotate Primary element filter (A) anticlock wise to remove. Do not use excessive force. If filter does not pull out with ease, move side-to-side to remove safely.

4. Removal of Secondary filter (B) is similar to removal of Primary filter (A).

5. Install new secondary filter element (B) carefully and lock the filter by rotating the 1/4 turn in clockwise direction.

Run this procedure

250 Hourly Tractor Maintenance

Service air cleanerd

Check oil level in MFWD axle and wheel hubs

Inspect altemator/fan belt

Lubricate 3-point hitch

Replace transmission-hydraulic filter

Adjust clutch free play

Check neutral start system

Transmission Control