John Deere Tractor 6415

Within First 100 Hours of Operation

Check and retighten air intake hose clamps

Check and retighten hydraulic hose clamps

Lubricate the following points if operating the tractor in extremely wet or excessively muddy conditions:

Drain off engine oil and refill

Replace engine oil filters. Use John Deere filter inserts

Check air intake hoses for leaks

Replace transmission/hydraulic system filters

Change front axle final drive and differential oil

Lubricating Front Axle and U-Jointed Shaft

Check entire tractor for loose bolts.

Check charge and clean battery terminals.

Refer to “Service—As Necessary” section and follow safety guidelines.

Sign off on the hourly maintenance

Select the lubrication points serviced

Transmission/hydraulic system oil level

Sign off on the daily maintenance

Remove filter insert (A) and water separator (B)

Mount new filter insert in water separator

Install filter insert/ water separator assembly filled with diesel

Lubricate Rear Transmission Bearings

Check condition of U-jointed shaft for play and loose bolts. If there is play, contact your dealer

Primary Filter Insert Cleaning Procedure