John Deere Tractor 3046R

Enter the engine's hour meter reading

Is the engine's hour meter reading less than 400?

If the engine's hour meter reading is less than 400, change engine oil and filter

Inspect air intake system hoses and connections

Sign off on the yearly maintenance

Check cab rollover protection system mounting hardware torque

Check or replace cab air filters

Check hardware torque on front hitch (if equipped)

Check front hitch hydraulic connections for leaks every 100 hours

Sign off on the 50 Hourly Maintenance

Check engine valve clearance. See your John Deere dealer.

Drain, Flush and Refill Engine Cooling System when coolant is NOT checked annually or NOT serviced with the pre-diluted John Deere COOL-GARD II (every 2000 hours or yearly)

Drain, Flush and Refill Engine Cooling System when coolant is checked annually and serviced with the pre-diluted John Deere COOL-GARD II™ (every 6000 hours or 6 yearly);

3. Place drain pan under the oil drain plug (A) on the underside of engine.

5. Wipe dirt from around the oil filter (B).

6. Turn filter counterclockwise to remove.

7. Put a light coat of clean engine oil on gasket of the new filter.

8. Install replacement oil filter by turning filter clockwise until gasket contacts filter base. Tighten additional 1/2 turn.

Belt tension within specifications

Adjusting bolt and pivot bolt loosened