Immergas Boiler VICTRIX PRO V2 100 G31

Use damp cloths and neutral detergent to clean the appliance casing

Ensure no abrasive or powder detergents are used

Verify compliance with standards

Confirm all safety features are intact

Check performance and reliability of the appliance

Inspect the appliance for any visible damage

Remove ignition and detection electrodes

Unscrew the fixing screws of the ignition and detection electrodes

Remove the ignition and detection electrodes

Actuate a blade under the surface of the insulating panel to remove it

Remove the residue of the fixing adhesive from the surface of the manifold

Replace the insulating panel using suitable sealant

Clean the flue side of the heat exchanger.

Check the correct positioning, integrity and cleanliness of the detection and ignition electrode; remove any oxide present.

Remove deposits in the combustion chamber and clean heat exchanger coils using nylon or broomcorn brushes.

Check the integrity of the insulating panels inside the combustion chamber and replace if damaged.

Visually check for water leaks or oxidation from/on connections and traces of condensate residues inside the sealed chamber.

Check the contents of the condensate drain trap.