IBC Technologies Boiler SL 40-399 G3

Inspect system for unusual noises

Check vent terminals for obstructions

Ensure combustible materials are away from the boiler

Wear long sleeved, loose fitting clothing, gloves, and eye protection.

Wash with soap and water after contact.

Wash potentially contaminated clothes separately from other laundry and rinse washing machine thoroughly.

Discard used insulation in an air tight plastic bag.

Removing the Burner on SL 26-260 G3

Turn off the electric power and gas supply to the boiler.

Ensure that the boiler cools down to the surrounding temperature.

Turn off the electric power and gas supply to the boiler

Ensure that the boiler has cooled down to the surrounding temperature

Check if draining the boiler is necessary due to freezing conditions

Use a ladder or step for a clear vertical view of the work area

Remove and clean the condensate trap

Ensure the condensate trap is completely refilled before firing the boiler

Check the pH level of condensate discharge if neutralization is used

Burner Inspection and Maintenance

Check if the burner is operating properly

Remove and clean or replace the burner if necessary

Use a CO2 analyzer to determine proper combustion

Boiler Operation Consistency Check

Verify boiler operation against the Touchscreen Boiler Controller Manual

Water Temperature and Setpoint Verification

Record current water temperature target

Record current water temperature setpoint

Are the temperature target and setpoint satisfactory?

Check operating history using the boiler's Logs menu

Check error logs using the boiler's Error Logs menu