Haas Automation Vertical Machining Center UMC-1000

Axis Lubrication: Inspect grease reservoir level.

Electrical Cabinet: Clean vector drive air vents / filter.

Enclosure: Inspect way covers and lubricate.

Spindle Lubrication: Inspect lubrication tank level.

Sign off on the monthly maintenance

1) Auxiliary Filter: Replace the filter bag. Check the Gauge

2) Standard Flood Coolant System: Clean the filter screen. As required.

3) Spindle: Clean and lubricate the spindle taper. As required.

4) Tooling: Grease the pull studs. As required.;

1) Automatic Tool Changer - SMTC: Inspect the arm plunger and adjuster assembly.

2) Auxiliary Filter: Inspect the hoses for cracking.

3) Axis Lubrication: Inspect the hoses for cracking.

4) Oil Skimmer: Inspect the oil skimmer pickup tube.

5) Pneumatics: Inspect the hoses for cracking.

- Check the probe calibration.

7) Standard Flood Coolant System:

1) Automatic Tool Changer - SMTC: Grease the tool changer cams.

2) Minimum Quantity Lubrication: Clean the filter inside the oil reservoir.

3) Pneumatics: Clean the Air Purge Solenoid.

4) Rotary Axes: Inspect the oil.

5) Spindle: Check the spindle drawbar force.;

- Inspect the door interlock operation.;