Felins Tying Machine 2000-22

Inspect for loose fasteners, drive collars, and clamps. (See Adjustments/Repairs section)

Inspect for loose electrical connections.(See Adjustments/Repairs section)

Inspect for electrical connections in close proximity to moving parts. (See Adjustments/Repairs section)

Inspect for metal filings at or near wear points. (See Adjustments/Repairs section)

Inspect knotter and knotter jaw for excessive wear. (See Adjustments/Repairs section)

Inspect the delivery arm break-away mechanism to ensure it will break away properly. (See Adjustments/Repairs section);

Refer to the lubrication photos for lubrication points for oil and grease. Most, but not all, of the lubrication points are highlighted on the machine with white paint. Lubricate the machine as presented in the Lubrication Schedule.

The following locations are lubricated with 2 - 3 drops of Felins lubricating oil (Part No. 300A03024):

• Oil hole for main shaft at base of column - Figure 23

• Oil hole for main shaft in shaft support - Figure 24

• Oil hole for stripper pivot - Figure 25

• Oil hole for tucker pivot - Figure 25

• Oil hole in cam follower roller - Figure 26

• Base of knotter at top of main frame - Figure 27

Inspect for loose fasteners, drive collars, and clamps. (See Adjustments/Repairs section)

Inspect for loose electrical connections.(See Adjustments/Repairs section)

Inspect for electrical connections in close proximity to moving parts. (See Adjustments/Repairs section)

Inspect for metal filings at or near wear points. (See Adjustments/Repairs section)

Inspect knotter and knotter jaw for excessive wear. (See Adjustments/Repairs section)

Inspect the delivery arm break-away mechanism to ensure it will break away properly. (See Adjustments/Repairs section);

Refer to the lubrication photos for lubrication points for oil and grease. Most, but not all, of the lubrication points are highlighted on the machine with white paint. Lubricate the machine as presented in the Lubrication Schedule.

The following locations are lubricated with 2 - 3 drops of Felins lubricating oil (Part No. 300A03024):

• Oil hole for main shaft at base of column - Figure 23

• Oil hole for main shaft in shaft support - Figure 24

• Oil hole for stripper pivot - Figure 25

• Oil hole for tucker pivot - Figure 25

• Oil hole in cam follower roller - Figure 26

• Base of knotter at top of main frame - Figure 27

Refer to the lubrication photos for lubrication points for oil and grease. Most, but not all, of the lubrication points are highlighted on the machine with white paint. Lubricate the machine as presented in the Lubrication Schedule.

The following locations are lubricated with 2 - 3 drops of Felins lubricating oil (Part No. 300A03024):

• Oil hole for main shaft at base of column - Figure 23

• Oil hole for main shaft in shaft support - Figure 24

• Oil hole for stripper pivot - Figure 25

• Oil hole for tucker pivot - Figure 25

• Oil hole in cam follower roller - Figure 26

• Base of knotter at top of main frame - Figure 27