

Turn manuals into instant answers
with your AI-powered assistantTurn manuals into instant answers
with your AI-powered assistant
Get instant access to all the maintenance information you need. Empower technicians to perform preventive maintenance with asset packages, ready to use right out of the box.
Find all the essential guides in one place.
Tensioning Guide
Belt-diagram
C-120 pulleys
+ 13 more
Pre-built workflows to keep your asset running smoothly.
Daily Electrical System Inspection
Replace Roller and Pulley
Install Engine B-120
+ 29 more
Integrate maintenance plans directly into your work orders.
Motion Industries
Applied Industrial Technologies
Electrical Brothers
+ 5 more
Access the parts list for your equipment in MaintainX.
Drive Motor
B2 Rollers
Tensioning System
+ 40 more

Mitsubishi Split-Type Air Conditioner PUZ-A18NHA6-BS
Create an account to install this asset package.
Integrate maintenance plans directly into your work orders in MaintainX.
4-Way Valve Coil And Linear Expansion Valve Coil Replacement
(1) Remove the service panel. (See Photo 1)
(2) Remove the top panel. (See Photo 1)
(3) Remove the front panel. (See Photo 1)
(4) Remove the conduit cover and cord cover.
(5) Remove the back panel. (See Photo 1)
(6) Remove the electrical parts box. (See Photo 5)
[Removing the 4-way valve coil (21S4)]
(7) Remove 1 4-way valve coil fixing screw (M4 × 6).
(8) Remove the 4-way valve coil by sliding the coil to the right.
4-Way Valve Replacement
Upload Photo 1 of the service, top, front, and back panels removed
Upload Photo 2 of the conduit cover and cord cover removed
Upload Photo 5 of the electrical parts box removed
Upload Photo 8 of the 4-way valve coil removed
Refrigerant recovered without spreading in the air?
Welded part of four-way valve removed?
Note: The welded part can be removed easily by removing the right side panel.
Note: When installing the four-way valve, cover it with a wet cloth to prevent it from heating (250 ̊F or more), then braze the pipes so that the inside of pipes are not oxidized.
Sign off on the 4-way valve replacement
Accumulator Replacement
Remove the service panel
Upload a photo of the removed service panel
Remove the top panel
Upload a photo of the removed top panel
Remove the front panel
Upload a photo of the removed front panel
Remove the conduit cover and cord cover
Upload a photo of the removed conduit and cord cover
Remove the back panel
Compressor Replacement
Remove the service panel
Upload a photo of the removed service panel
Remove the top panel
Upload a photo of the removed top panel
Remove the front panel
Upload a photo of the removed front panel
Remove the conduit cover and cord cover
Upload a photo of the removed conduit and cord cover
Remove the back panel
Electrical Parts Box Replacement
Upload a photo of the service panel before removal
Service panel removed
Upload a photo of the top panel before removal
Top panel removed
Upload a photo of the front panel before removal
Front panel removed
Indoor/outdoor connecting wire disconnected from terminal block
Remove all the following connectors from controller circuit board
Disconnected wire pulled out from the electrical parts box
Access the parts list for your equipment in MaintainX.
Inverter Starter Type, Hermetic Compressor - 0,9 KW
SNB130FQCM1
Inverter Starter Type, Hermetic Compressor - 0,9 KW
SNB130FQCM1
Inverter Starter Type, Hermetic Compressor - 0,9 KW
SNB130FQCM1
MaintainX CoPilot is your expert colleague, on call 24/7, helping your team find the answers they need to keep equipment running.
Reduce Unplanned Downtime
Ensure your team follows consistent procedures to minimize equipment failures and costly delays.
Maximize Asset Availability
Keep your assets running longer and more reliably, with standardized maintenance workflows from OEM manuals.
Lower Maintenance Costs
Turn any technician into an expert to streamline operations, maintain more assets, and reduce overall costs.
Thousands of companies manage their assets with MaintainX













