Design Machine and Manufacturing Tray Packer CTC-30

Warning: Always turn off the machine and drain the tank of air pressure before servicing.

If difficulty is experienced in moving sliding parts, stop the process and look for interference.

Lubricate Non-Sealed Bearings and Bronze Bushings (Without Automatic Oil System) 120 cpm - up daily

Adjust your schedule if your machine is operated above the recommended range.

Oil Lubricant Level: Pneumatic (Air System)

Use FMO 85 or equivalent (DO NOT USE SYNTHETIC OILS)

Check bushings and slide shafts daily, adding lubrication if necessary.

Use SAE 10 or Pneumatic Oil for bushings and slide shafts.

Lubricate Sealed Bearings (Without Automatic Oil System) 120 – 200 cpm and 200 – up

Enter the cpm for lubricating sealed bearings

Clean Sealed Universal Joint (All Machinery) 120 – 200 cpm and 200 – up

Enter the cpm for cleaning sealed universal joint

Clean Universal Joints All speeds

Enter the speed for cleaning universal joints

The schedule is figured on a 71⁄2 hour workday, 5 days per week. If your machine is operated above this range, adjust your schedule accordingly.

Because there are a variety of bearing types and manufacturers, each with its own lubrication plan, this schedule can only serve as a guideline. For accurate lubrication intervals for specific components, the manufacturers’ information pamphlets have been supplied with this manual.

Upload the manufacturers’ information pamphlets

Lubricate Non-Sealed Bearings and Bronze Bushings (Without Automatic Oil System) 0 – 60 cpm

Lubricate Non-Sealed Bearings and Bronze Bushings (Without Automatic Oil System) 60 – 120 cpm on the Alternate Days

The schedule is figured on a 71⁄2 hour workday, 5 days per week. If your machine is operated above this range, adjust your schedule accordingly.

Sign off on the weekly tray packer maintenance

Lubricate Sealed Bearings (Without Automatic Oil System) 0 – 60 cpm and 60 – 120 cpm

Lubrication of sealed bearings completed?

Clean Sealed Universal Joint (All Machinery) 60 – 120 cpm

Cleaning of sealed universal joint completed?

The schedule is figured on a 71⁄2 hour workday, 5 days per week. If your machine is operated above this range, adjust your schedule accordingly.

Because there are a variety of bearing types and manufacturers, each with its own lubrication plan, this schedule can only serve as a guideline. For accurate lubrication intervals for specific components, the manufacturers’ information pamphlets have been supplied with this manual.

Upload a photo of the completed task

Sign off on the lubrication process

Warning: This procedure requires trained personnel with PPE!

This schedule is figured on a 71⁄2 hour workday, 5 days per week. If your machine is operated above this range, adjust your schedule accordingly.

Because there are a variety of bearing types and manufacturers, each with its own lubrication plan, this schedule can only serve as a guideline. For accurate lubrication intervals for specific components, the manufacturers’ information pamphlets have been supplied with this manual.

Clean Sealed Universal Joint (All Machinery) 0 – 60 cpm

Upload a photo of the cleaned joint