Crown Pallet Truck PE3500-60

DANGER! TRUCK BATTERIES CAN BE DANGEROUS: Your truck battery produces fumes that can explode. It also contains acid that could burn or disfigure you.

Do not try to install, remove, charge or service your truck battery unless you are trained and authorized.

Never smoke or use an open flame around batteries.

Your company should provide an area where it is safe to work on batteries. Use that area for all battery work.

Use protective equipment such as gloves, eye shields, aprons etc.

BATTERY RETAINERS MUST BE IN PLACE: The battery could slide out if all retainers are not in place. Check that both retainers are installed before operating your truck.

COAST SELECTOR MUST BE OFF: Be sure the coast selector is off and the brake is on before removing or installing a battery.

BATTERY SIZE IS IMPORTANT: Make certain you use the correct size and weight battery. Never operate a truck that has an underweight or undersize battery installed.

Turn the truck OFF. Check that all controls are in neutral. Disconnect the battery. Be sure the coast selector is off.

Test truck in an uncongested area

Try all the hydraulic functions

Drive the truck slowly in both directions

Check braking distance in forward and reverse

Drive through the full speed range in both forward and reverse

Know the distance it takes to stop before you start working

Check Coast, QuickPick™ controls, and any other options your truck may have

Battery retainers on both sides of the truck are properly installed

All wheels are in good condition

Twist grips and grab bar are clean

Both forks are secure and not bent, cracked or badly worn

No signs of hydraulic leaks under the truck