Crown Narrow-Aisle Reach Truck RD-5795S-32

- CHECK YOUR TRUCK BEFORE STARTING WORK

You must make sure your truck is safe to use

- Walk around your truck and check it over

- Inspect your harness, tether, snap hooks and mounting points. Have them replaced if they look damaged or worn or have ever been used to stop a fall

- Check to make sure the battery is charged, water level is OK and vent caps are in place. Don't use an open flame to check the battery

- Make certain the battery retainer and side cover are properly installed and adjusted

- See that all wheels are in good condition

- Check that both forks are secure and not bent, cracked or badly worn

Warning: Battery maintenance requires trained personnel with PPE!

Truck turned OFF and battery disconnected

Correct size and weight battery used

Roller stand used for battery installation or removal

Nothing metal touched the top of the cells

Approved spreader bar used for battery placement

Battery retainer replaced and retainers on both sides of the truck are in place

Battery retainers properly adjusted to prevent the battery from shifting

Test your truck in an uncongested area

Operate the truck slowly in both directions

Operate through the full speed range in both forward and reverse

Check braking distance in forward and reverse. Load size and floor conditions can affect these distances

Know the distance it takes to stop before you start working. If the braking distance is too long to stop safely, don't use the truck

If anything doesn't look, work or feel right, don't drive the truck. Report the problem to your supervisor

Sign here to confirm the daily truck test