Crown Electric Pallet Jack WP2335-45

Clean, check and replace contactors if necessary

Check lift limit switch operation

Check wires, switches and connections are secure

Ensure seal is tight in lift cylinder

Check oil level in hydraulic oil tank, replenish if necessary

Check load wheels and castor bearings for play, replace bearings if necessary

Ensure wheel nuts are correctly torqued in drive wheel

Check commutator for damage and wear

Replenish gear oil if necessary

Check brake lining and contact surfaces for wear

Check electrolyte level and replenish if necessary

Check Battery Connector operation

Check lift/lower rocker switch operation

Check fast/slow travel switch operation

Check reverse safety switch operation

Check operation and grease flat coil springs for return function

Check brake lining and contact surfaces for wear, replace parts if necessary

Clean attachments of cylinder (bottom) and piston rods (top), check for wear, replace if necessary, grease

Clean bushings and striking surfaces check for wear, replace if necessary, grease

Clean, check for wear, replace if necessary, grease

Sign off on the 500 Hour / 6 Month Maintenance

Clean Truck, battery and charger connectors/plugs contacts and check contact springs

Check Carbon brushes for wear, ease of motion and contamination

Check Pump and drive motor for wear, ease of motion and contamination

Check connecting rods for wear, ensure attachment is secure, tighten if necessary or replace connecting rods

Check forks height setting, adjust if necessary

Replace gear oil in gear unit at initial 250 Hour service

Replace suction and return filters in hydraulic system at initial 500 Hour service

Sign off on the 250 Hour / 3 Month Maintenance