APC Smart-UPS SRT1000RMXLA-NC

Record the battery energy output during UPS operation

Record the battery voltage during UPS operation

Has the UPS Self Test been performed automatically?

Perform a manual UPS Self Test if automatic test was not conducted

Conduct a Runtime Calibration Test

Ensure the device is powered off

Locate the button on the bottom of the display interface panel

Press the button and slide the bottom of the LCD display interface screen out until an audible click is heard

Is the display angle satisfactory?

Remove all jewelry such as wristwatches and rings

Ensure the replacement batteries are of the same number and type as originally installed

Replace batteries immediately if the unit indicates battery replacement is necessary

Replace batteries before end of life

Ensure no contact with internal components of the battery during replacement

Avoid overcharging and overheating of batteries

Battery Module Disconnection and Removal

Disconnect the connected battery module in the UPS

Connect the battery module to the UPS

Securely connect the battery module by pressing the battery connector into the UPS until it is firmly connected