Alliance Laundry Systems Tumble Dryer UHT45N

Disconnect electric power to the tumble dryer

Close gas shut-off valve to gas tumble dryer

Close steam valve to steam tumble dryer

Ensure all guards/panels are in place before starting the tumble dryer

Reconnect any removed ground wires to ensure proper grounding

Check if the door strike requires adjustment

Measure the pull force required to open the door (in pounds)

Hardware and Connections Inspection

Steam Filter and Panel Maintenance

Check steam filter and replace if dirty

Remove all front panels and vacuum, including coin drop mechanisms

Check cylinder and front panel seals

Inspect cabinet and inner panels for any damage, replace or repair as needed

Burner and Fire Suppression System Maintenance

Disconnect electric power to the tumble dryer before servicing.

Close gas shut-off valve to gas tumble dryer before servicing.

Close steam valve to steam tumble dryer before servicing.

Ensure all guards/panels are in place before starting the tumble dryer.

Reconnect any removed ground wires to ensure proper grounding of the tumble dryer.

Remove all lint from lint compartments and lint screen.

Remove external duct and duct access covers, if present.

Clean inside of duct with a vacuum.

Clean dampers and ensure they operate freely.

Replace duct and all access covers before returning tumble dryer to operation.

Ensure even lint distribution over lint screen.

Carefully wipe any accumulated lint off the cabinet high limit thermostat and thermistor, including perforated cover.

Clean lint and debris buildup from blower to maintain proper airflow.

Ensure the main supplies of electricity and water to the tumble dryer are on at all times.

Verify that the water dispensing system is not activated before operating the tumble dryer.

Check with local water company or municipal authority for local codes compliance.

Plumbing and Installation Verification

Confirm all plumbing connections are made by a qualified professional.

Verify that plumbing conforms to local, state, and federal regulations or codes.