Taylor Blended Ice Machine C029

Press the Menu key to display the Main Menu screen.

Remove the product bin from the machine and place it on a stable, flat surface.

Move the bin slide to the 'open' position and remove the empty product bag.

Wipe the inside of the bin with a clean, sanitized cloth.

Remove the bag of product from the box.

Remove the ice hopper cover and scoop out as much ice as possible using a clean, sanitized ice scoop.

Reinstall the ice hopper cover.

Press the ICE key until all remaining ice has dispensed into the blender pitcher.

Remove the blender pitcher and discard the ice into the back sink.

Place the power switch in the OFF position.

Remove the ice hopper and cover and take them to the 3-compartment sink.

Remove the splash guard and ice shaver chute and take them to the 3-compartment sink.

Prepare sanitizing solution with chlorine concentrate of 100 - 200 PPM

Wipe down outside surfaces with sanitizing solution

Fill cup dispensers and cup lid holders

Press MENU key to display Main Menu screen

Press the MENU key from the Beverage Selection screen.

Press the CLEANING key from the Main Menu screen.

Prepare an approved cleaning solution in the 5 gallon Cleaning Solution pail (pail #1).

Fill the 5 gallon Rinse pail (pail #2) with warm water.

Prepare an approved sanitizing solution in the 5 gallon Sanitizing Solution pail (pail #3).

Ensure ice level is above the ADD ICE line on the hopper

Press the MENU key to display the Main Menu

Place a blender pitcher in the dispensing area

Press the ICE key until the pitcher is half full of shaved ice

Discard the ice into the back sink