

Turn manuals into instant answers
with your AI-powered assistantTurn manuals into instant answers
with your AI-powered assistant
Get instant access to all the maintenance information you need. Empower technicians to perform preventive maintenance with asset packages, ready to use right out of the box.
Find all the essential guides in one place.
Tensioning Guide
Belt-diagram
C-120 pulleys
+ 13 more
Pre-built workflows to keep your asset running smoothly.
Daily Electrical System Inspection
Replace Roller and Pulley
Install Engine B-120
+ 29 more
Integrate maintenance plans directly into your work orders.
Motion Industries
Applied Industrial Technologies
Electrical Brothers
+ 5 more
Access the parts list for your equipment in MaintainX.
Drive Motor
B2 Rollers
Tensioning System
+ 40 more

SEW eurodrive Electric Motor DV132M4
Create an account to install this asset package.
Integrate maintenance plans directly into your work orders in MaintainX.
2 Yearly Brake Inspection
8.1 Inspection and maintenance intervals
Ensure the use of genuine spare parts
Ensure motor and brake are isolated from the supply before starting work
Inspect brake types if used as a holding brake
Document inspection intervals based on operating conditions
Brake Inspection Procedure
Measure the brake disk thickness
Measure and set the working air gap
Inspect brake components
Brake Maintenance
Inspection / maintenance of the BMG61/122 brake
Ensure BMG61/122 brakes with encoder mounting are only used as a holding brake
Ensure maintenance work on the BMG61/122 brake with encoder mounting is only performed by SEW-EURODRIVE
BMG61/122 brake without encoder mounting — set the working air gap
Isolate the motor and brake from the supply, safeguarding them against unintentional power-up
Remove the forced cooling fan, if installed, and the flange cover or fan guard [27]
Push the rubber sealing collar aside [5], releasing the clamping strap to do this if necessary, and extract the abraded matter
Measure the brake discs [6], [10] and check if the brake disc is < 12 mm
Is the brake disc < 12 mm?
10000 Hourly Backstop Lubrication
8.1 Inspection and maintenance intervals
Change the low-viscosity grease in the backstop
8.3 Inspection / maintenance on the motor — Lubrication of the backstop
Verify the grease type
Check the temperature range compatibility
Select the motor type for lubrication
Apply the specified amount of grease
Backstop Blocking Direction Adjustment
6.2 Altering the blocking direction on motors with a backstop
Note the direction of rotation and number of stages
Operate the backstop at half motor voltage for checking purposes
Isolate the motor from the supply
Remove fan guard and fan, unscrew hexagon socket head cap screws
Remove the V-ring and sealing flange with felt ring
Remove the circlip and equalizing rings if applicable
Pull the carrier and wedge element train, turn by 180° and press back on
Refill the grease
Anticorrosion Coating Maintenance
8.1 Inspection and maintenance intervals
Check the condition of the anticorrosion coating
Is the coating intact and undamaged?
Touch up the surface coating if minor scratches are present
Renew the anticorrosion coating if significant wear or peeling is observed
Access the parts list for your equipment in MaintainX.
Carrier Plate For Installation Integrated In The Motor According To The ECOFAST Specification; Obtain From SEW-EURODRIVE
0187 390 3
BMG02 Brake 24 VDC 0.8 Nm
0574 319 2
BMG02 Brake 24 VDC 1.2 Nm
0574 323 0
BMG02/HR Brake 24 VDC 0.8 Nm
0574 327 3
BMG02/HR Brake 24 VDC 1.2 Nm
0574 331 1
Carrier Plate For Installation Integrated In The Motor According To The ECOFAST Specification; Obtain From SEW-EURODRIVE
0187 390 3
BMG02 Brake 24 VDC 0.8 Nm
0574 319 2
BMG02 Brake 24 VDC 1.2 Nm
0574 323 0
BMG02/HR Brake 24 VDC 0.8 Nm
0574 327 3
BMG02/HR Brake 24 VDC 1.2 Nm
0574 331 1
Carrier Plate For Installation Integrated In The Motor According To The ECOFAST Specification; Obtain From SEW-EURODRIVE
0187 390 3
BMG02 Brake 24 VDC 0.8 Nm
0574 319 2
BMG02 Brake 24 VDC 1.2 Nm
0574 323 0
BMG02/HR Brake 24 VDC 0.8 Nm
0574 327 3
BMG02/HR Brake 24 VDC 1.2 Nm
0574 331 1
MaintainX CoPilot is your expert colleague, on call 24/7, helping your team find the answers they need to keep equipment running.
Reduce Unplanned Downtime
Ensure your team follows consistent procedures to minimize equipment failures and costly delays.
Maximize Asset Availability
Keep your assets running longer and more reliably, with standardized maintenance workflows from OEM manuals.
Lower Maintenance Costs
Turn any technician into an expert to streamline operations, maintain more assets, and reduce overall costs.
Thousands of companies manage their assets with MaintainX













