Robot Coupe Mixer R401

Remove the lid from the bowl cutter attachment

Rotate the bowl to the left to remove it from the motor base

Pull up to disengage the bowl, leaving the blade inside if working with liquids

Unplug the appliance before cleaning

Ensure the motor unit is not placed in water

Clean the appliance and its attachments at the end of each cycle

Use suitable cleaning fluids for aluminum parts

Inspection of Bowl Locating Plates

Inspect the condition of the bowl locating plates for wear and tear

Are the bowl locating plates worn out?

Replacement of Bowl Locating Plates

Ensure the machine is powered off and unplugged

Remove the bowl from the motor base

Detach the worn-out bowl locating plates from the motor base

Install new bowl locating plates securely onto the motor base

Is the bowl securely attached to the motor base after replacement?

Apply food safe lubricant to the motor seal

Inspect the motor seal for wear and tear

Is the motor seal in good condition?

Replace the motor seal if necessary

Is the motor completely watertight after lubrication and inspection?

Unplug the appliance before opening the motor housing

Check that all the seals and washers are in place and in good condition

Are all safety devices in good working order?

Check and maintain attachments for corrosive agents

Is the power cord or plug damaged?