Peerless Pump Company Vertical Turbine Industrial Pumps Open Line Shaft 7HXB

Pump-motor alignment: Check for change in alignment

Vibration: Check for change in vibration

Fasteners: Check for loose fasteners

Report any problems found during the inspection

To ensure satisfactory operation of the pumping equipment, frequent inspection and periodic maintenance are required.

An inspection and maintenance log should be kept and the inspector is to immediately report any problems.

A suggested guide for preventative maintenance for normal applications is given below.

Unusual applications with abnormal heat, moisture, dust, etc., may require more frequent inspection and service.

Packing, packing box: Inspect for excessive leakage

Warning: Drain the pump and isolate pipework before dismantling the pump.

Warning: There may be occasions when a part such as the impeller has either been shrunk-fit onto the pump shaft or has become difficult to remove due to products that are corrosive in nature.

Warning: Before opening the terminal box of an electric motor, make sure that the power supply has been switched off.

Is the area adjacent to the pump cleared for storage of pump parts?

Are parallel timbers arranged on the ground to support the pump column and shaft sections horizontally?

Is the discharge pipe disconnected from the discharge head?

If the driver is equipped with an oil-cooling system, is the external tubing or piping removed?

On pumps equipped with an air-pressure water level testing system, is the gauge removed and the tubing connection inside the discharge head disconnected?

Is the electrical connection of the motor at the terminal box removed?

Warning: This inspection requires trained personnel with PPE!

Packing, packing box inspection

Report any problems found during the inspection

Sign off on the packing box inspection

Warning: This maintenance check requires trained personnel with PPE!

To ensure satisfactory operation of the pumping equipment, frequent inspection and periodic maintenance are required.

An inspection and maintenance log should be kept and the inspector is to immediately report any problems.

Unusual applications with abnormal heat, moisture, dust, etc., may require more frequent inspection and service.

Sign off on the packing box maintenance