MODINE Unit Heater BTP225SS0111SBAN

Confirm use of factory-approved service replacement parts only

Record appliance model number, serial number, and company address from the rating plate

Confirm no substitution of parts or controls not approved by the factory

Is the service being performed by a qualified service agency?

Ensure no attempt to reuse any mechanical or electrical controllers which have been wet

Confirm replacement of any defective controller

Verify familiarity with unit heaters and their controls

Use only factory-approved service replacement parts.

Refer to the rating plate for appliance model number, serial number, and company address.

Do not substitute parts or controls not approved by the factory.

Ensure servicing is performed by a qualified service agency.

Do not reuse any mechanical or electrical controllers which have been wet.

Ensure personnel are trained and familiar with unit heaters and their controls.

Confirm use of factory-approved service replacement parts only

Record appliance model number, serial number, and company address from the rating plate

Confirm no substitution of parts or controls not approved by the factory

Is the servicing or repairing performed by a qualified service agency?

Ensure no attempt to reuse any mechanical or electrical controllers which have been wet

Confirm replacement of defective controller

Is the person servicing trained and familiar with the operation of unit heaters and their controls?

Ensure gas is turned off at the manual shut-off valve ahead of the combination gas control.

Turn off all electric power to the heater.

Verify the following information from the rating plate on the appliance

Air Moving Components Inspection

Check fan for fit on motor shaft.

Ensure all servicing is performed by a qualified service agency.

Turn off gas at the manual shut-off valve ahead of the combination gas control.

Turn off all electric power to the heater.

Check gas valves and piping for general cleanliness and tightness.

Verify that the gas controls are operating properly.

Use only factory-approved service replacement parts.