MODINE Unit Heater PTP200SS0121SBAN

Ensure all servicing is performed by a qualified service agency.

Turn off gas at the manual shut-off valve ahead of the combination gas control.

Turn off all electric power to the heater.

Check gas valves and piping for general cleanliness and tightness.

Inspect gas controls to ensure the unit is operating properly.

Were any mechanical or electrical controllers found to be wet?

Acknowledge understanding of using only factory-approved service replacement parts

Acknowledge understanding of the risk of substituting unapproved parts

Ensure the following precautions are taken

Confirm training and familiarity with unit heaters and their controls

Turn off gas at the manual shut-off valve ahead of the combination gas control

Turn off all electric power to the heater

Use only factory-approved service replacement parts

Refer to the rating plate for appliance details

Substitution of parts not approved by the factory is at owner's risk

Ensure the following precautions are taken

Ensure personnel are trained and familiar with unit heaters and controls

Turn off gas at the manual shut-off valve ahead of the combination gas control

Ensure gas is turned off at the manual shut-off valve ahead of the combination gas control.

Turn off all electric power to the heater.

Verify the following information from the rating plate on the appliance

Check fan for fit on motor shaft.

Inspect fan blades for any damage.

Use only factory-approved service replacement parts.

Refer to the rating plate for appliance model number, serial number, and company address.

Do not substitute parts or controls not approved by the factory.

Ensure servicing is performed by a qualified service agency.

Do not reuse any mechanical or electrical controllers that have been wet.

Ensure all service personnel are trained and familiar with unit heaters and their controls.