MODINE Unit Heater BTP150SS0122SBAN

Ensure all servicing is performed by a qualified service agency.

Turn off gas at the manual shut-off valve ahead of the combination gas control.

Turn off all electric power to the heater.

Check gas valves and piping for general cleanliness and tightness.

Inspect gas controls to ensure the unit is operating properly.

Use only factory-approved service replacement parts.

Ensure gas is turned off at the manual shut-off valve ahead of the combination gas control.

Turn off all electric power to the heater.

Check fan for fit on motor shaft.

Verify use of factory-approved service replacement parts only.

Confirm no substitution of parts or controls not approved by the factory.

Ensure all service and repairs use factory-approved replacement parts.

Verify the appliance model number, serial number, and company address from the rating plate.

Confirm that servicing is performed by a qualified service agency.

Ensure gas is turned off at the manual shut-off valve ahead of the combination gas control.

Turn off all electric power to the heater.

Perform periodic cleaning of inlet and vent terminal screens.

Use only factory-approved service replacement parts.

Refer to the rating plate for appliance model number, serial number, and company address.

Do not substitute parts or controls not approved by the factory.

Ensure servicing is performed by a qualified service agency.

Do not reuse any mechanical or electrical controllers that have been wet.

Ensure personnel are trained and familiar with unit heaters and their controls.

Ensure all service and repairs use factory-approved replacement parts.

Verify the appliance model number, serial number, and company address from the rating plate.

Confirm that servicing is performed by a qualified service agency.

Ensure that no mechanical or electrical controllers that have been wet are reused.

Turn off gas at the manual shut-off valve ahead of the combination gas control.

Turn off all electric power to the heater.

Motor and Blower Housing Cleaning

Is the atmosphere dirty enough to require cleaning of motors and blower housing?