Mitsubishi Split-Type Air Conditioner PLA-A36BA4

Slide the knob of air intake grille toward the arrow 1 to open the air intake grille

Remove drop prevention hook from the panel

Slide the shaft in the hinge to the direction of the arrow 2 and remove the air intake grille

(1) Remove the air intake grille and the filter. (See Figure 1)

(2) Remove the 2 screws from the electrical box cover.

(3) Disconnect the connectors. (Refer to step 3)

(4) Remove the panel. (See Photo 4, 5)

(5) Remove the electrical wiring service panel (3 screws).

(6) Remove the drain pump wire cover (1 screw).

(7) Remove the electrical box. (See Photo 2)

(8) Remove the bell mouth. (See Photo 2)

(9) Remove the 4 screws and pull out the drain pan.

Warning: Ensure the power is off before starting the procedure

Upload a photo of the drain pan before removal

Upload a photo of the hose before removal

Upload a photo of the drain pump assembly before removal

Drain pump assembly removed successfully

Upload a photo of the drain pump before removal

Drain pump removed successfully

Warning: This procedure should only be performed by a trained electrician.

Air intake grille and filter removed

2 screws from the electrical box cover removed

2 electrical box fixing screws and 2 hooks removed

Check all electrical parts in the box

Sign off on the electrical box replacement

Warning: Ensure the power is off before starting the procedure

Upload a photo of the electrical box before removal

Upload a photo of the bell mouth before removal

Upload a photo of the wire cover before removal