Lenovo Business Laptop ThinkPad T14 Gen 5

Backup all important data from the M.2 solid-state drive

Turn off the computer and disconnect from AC power and all connected cables

Close the computer display and turn over the computer

M.2 Solid-State Drive Handling Guidelines

Observe the following guidelines when handling the M.2 solid-state drive

M.2 Solid-State Drive Replacement

Turn off the computer and disconnect from AC power and all connected cables

Close the computer display and turn over the computer

Remove the M.2 solid-state drive

Remove the M.2 solid-state drive bracket

Attention: Do not touch the contact edge of the memory module. Otherwise, the memory module might get damaged.

Turn off the computer and disconnect from AC power and all connected cables.

Close the computer display and turn over the computer.

Remove the base cover assembly.

Remove the memory module shielding cap.

Memory Module Installation Order

Turn off the computer and disconnect from AC power and all connected cables

Close the computer display and turn over the computer

Memory Module Shielding Cap Replacement

Remove the memory module shielding cap

Install the memory module shielding cap

Is the computer disconnected from AC power and all connected cables?

Remove the nano-SIM-card tray if applicable

Close the computer display and turn over the computer

Remove the base cover assembly with less than 5 kg pressure

Base Cover Assembly Installation

Install the base cover assembly