KSB SE & Co. KGaA Chemical Pump CPKN 32-200

Ensure maintenance work is performed outside potentially explosive atmospheres.

Verify that the pump set cannot be started up unintentionally.

Disconnect electrical connections before starting work on the pump set.

Secure the pump set to prevent tipping or falling over during assembly/dismantling.

Ensure all maintenance work is performed by authorised, qualified specialist personnel.

Prepare a maintenance schedule focusing on lubricants, shaft seal, and coupling.

Ensure suitable temperature monitoring for gland packings is in place.

Verify that gland packing is tightened correctly.

Avoid contact with unprotected rotating parts during operation.

Lightly tighten the nuts of the gland follower by hand.

Verify that the gland follower is mounted centred and at a right angle to the shaft using a feeler gauge.

Is the gland leaking after the pump has been primed?

Ensure maintenance work is performed outside potentially explosive atmospheres.

Verify that the pump set cannot be started up unintentionally.

Disconnect electrical connections before starting work on the pump set.

Secure the pump set to prevent tipping or falling over during assembly/dismantling.

Ensure all maintenance work is performed by authorised, qualified specialist personnel.

Prepare a maintenance schedule focusing on lubricants, shaft seal, and coupling.

Ensure all safety regulations at the installation site are observed.

Perform maintenance work on explosion-proof pump sets outside potentially explosive atmospheres.

Ensure the pump set cannot be started up unintentionally.

Disconnect electrical connections before carrying out work on the pump set.

Take appropriate measures to protect persons and the environment when draining fluids.

Secure the pump set/pump parts to prevent tipping or falling over during assembly/dismantling.

Service the pump set regularly with emphasis on lubricants, shaft seal, and coupling.

Ensure all safety regulations at the installation site are observed.

Perform maintenance work on explosion-proof pump sets outside potentially explosive atmospheres.

Ensure the pump set cannot be started up unintentionally.

Disconnect electrical connections before carrying out work on the pump set.

Take appropriate measures to protect persons and the environment when draining fluids.

Secure the pump set/pump parts to prevent tipping or falling over during assembly/dismantling.

Maintenance Schedule Preparation

Prepare a maintenance schedule with emphasis on lubricants, shaft seal, and coupling.