Imbera Freezer VR10

Clean internal surfaces of the hinged door with a moistened cloth

Clean external surfaces of the hinged door with a moistened cloth

Clean internal surfaces of the sliding door with a moistened cloth

Clean external surfaces of the sliding door with a moistened cloth

Disconnect the cooler from the wall outlet

Clean the cooler with a cloth, warm water, and neutral soap

Dry surfaces using a soft cloth or rag

Avoid using water hose or jet wash for cleaning

Avoid using solvent or abrasive products for cleaning

Avoid using sharp points to remove excessive dirt; use a brush if required

Disconnect the cooler from wall outlet before performing any maintenance or cleaning task.

Ensure no cleaning task is performed with water hose or jet wash.

Wear safety work gloves during cleaning and maintenance tasks.

Check if the cooler is forming ice and not cooling properly.

Report any ice formation and cooling issues to the Customer Service Center.

Manual Defrosting - For Freezer

Disconnect the cooler from wall outlet before performing any maintenance or cleaning task.

Are you wearing safety work gloves?

Remove the cooler’s front grill.

Remove dust, lint, and trash using a soft bristle brush or broom.

Is the condenser located in a grease-based location such as a kitchen or food cooking area?

Clean accumulated grease or grime with water and degreasing agents if in a grease-based location.

Ensure no sharp pointed objects are used to remove excessive grime; use a brush if required.