Graco Electric Airless Sprayer 17G184

Is there a paint leak down outside of pump?

Upload a photo of the pump repair kit

Enter the name of the Graco/MAGNUM authorized retailer, distributor, or service center consulted

Has the Pressure Relief Procedure been performed?

Has the easy access door pump been removed?

Has the pump assembly been removed from the mounting pins?

Routine maintenance is important to ensure proper operation of your sprayer.

- Inspect/clean InstaClean filter, fluid inlet strainer, and gun filter.

- Inspect motor shroud openings for blockage.

Note: Protect the internal drive parts of this sprayer from water. Openings in shroud allow cooling of mechanical parts and electronics inside. If water gets into these openings, the sprayer could malfunction or be permanently damaged.

Check hose for damage every time you spray. Do not attempt to repair hose if hose jacket or fittings are damaged. Do not use hoses shorter than 25 ft (7.6 m). Wrench tighten, using two wrenches.

• Always clean tips with compatible cleaning fluid and brush after spraying.

• Tips may require replacement after 15 gallons (57 liters) or they may last through 60 gallons (227 liters) depending on abrasiveness of paint.;