Goulds Pumps Vertical Turbine Pump VIT-FF 9A

Confirm completion of initial procedures

Verify mechanical seal lubrication and piping connection

Verify operation and regulation of cooling, heating, and flushing lines

Verify connections to driver and starting device match wiring diagram

Verify voltage, phase, and frequency on motor nameplate agree with line current

Rotate shaft manually to ensure impellers are not binding

Verify driver bearings are properly lubricated and check oil level in housing

Verify auxiliary seal components are properly vented

Check that the foundation and the hold-down bolts are tight

Ensure safety precautions are followed

6.4.2 Disassemble the head and column

Uncouple the driver or gear box from the pump shaft and mounting flanges

Remove all hold-down bolts and integral piping

Remove the coupling and mechanical seal

Continue disassembly down to the bowls

Move equipment to a safe/non Ex environment for repairs/adjustments or use spark resistant tools and work methods

Check for unusual noise, vibration, and bearing temperatures of thrust pot or electric motor

Ensure bearing housings are not insulated or accumulating dust

Check the pump and piping for leaks

Thrust pot lubrication guidelines

Verify lubrication requirements

Measure oil level when not operating

Is the oil level within the required range when not operating?

Is the oil level lower than the required level when operating?

Ensure pump is not operated if oil level is not at the required level