Goulds Pumps Vertical Turbine Pump VIT-FF 6A

6.2 Adjust and replace the packing

Check conditions for packing adjustment

Is the leakage rate less than one drop per second after adjustment?

Is the environment Ex-classified?

6.2.1 Adjust the packing when leaking is excessive

Tighten the gland nuts one-quarter turn with the pump in operation

Has the leakage decreased to two drops per second?

Shut down the pump if leakage continues

Allow the packing to compress until the gland is about to contact the upper face of the stuffing box

Check that the foundation and the hold-down bolts are tight

Is the pump performance satisfactory?

Pump performance follow-up actions

Thrust pot lubrication guidelines

Verify lubrication requirements

Measure oil level when not operating

Is the oil level within the required range when not operating?

Is the oil level lower than the required level when operating?

Ensure pump is not operated when oil level is not at the required level

Check for unusual noise, vibration, and bearing temperatures of thrust pot or electric motor

Ensure bearing housings are free from insulation and dust accumulation

Check the pump and piping for leaks