Goulds Pumps Pump 3355 4 x 5-10A-3600

6.1 Maintenance schedule — Annual inspections

Does the pump performance satisfy process requirements?

Consider shortening inspection intervals if applicable

Make the final alignment of the pump and driver

Run the unit under actual operating conditions to reach operating temperature

Shut down the pump and the driver

Check the alignment while the unit is still hot

Check Total Indicated Reading (T.I.R.)

Allow all system and pump components to cool before handling

If the pumped fluid is non-conductive, drain and flush the pump with a conductive fluid under safe conditions

Position the pump for disassembly

6.4.6 Disassemble the discharge end ball bearing for the radial suction configuration

2.3.2 Pump storage requirements

Ensure the unit is stored free from

Rotate the shaft by hand several times

6.1 Maintenance schedule — Routine maintenance

Move equipment to a safe/non Ex environment or use spark resistant tools and work methods

6.1 Maintenance schedule — Routine inspections

Move equipment to a safe/non Ex environment or use spark resistant tools and work methods