Goodman Gas Furnace AMSS920603BNAA

Ensure the air cleaner is installed in the correct position (not with the access door facing down).

Verify the air cleaner is located in the return air duct next to the blower compartment.

Electronic Air Cleaner Inspection

Inspect the accessibility of the electronic air cleaner for periodic inspection and cleaning.

Check the pre-filters for cleanliness and clean if necessary.

Inspect the electronic cells for cleanliness and clean if necessary.

Ensure the media air cleaner is accessible for periodic inspection and replacement of the filter cartridge.

Disconnect all power before servicing or installing the unit

Check the following furnace components for proper working order

Was the ignitor handled with care, avoiding bare fingers and rough handling?

Describe any issues found with the ignitor

Were all necessary repairs or services performed?

Turn the furnace on at the thermostat

Wait a few minutes for dust to settle

Check the burner flames for the following characteristics

Are the flames stable, quiet, soft and blue with slightly orange tips?

Do the flames extend directly outward from the burner ports without curling downward, floating or lifting off the ports?

Ensure all other gas appliances are turned off

Wait for at least fifteen minutes after the heating cycle has started

Clock the gas meter to determine the time for one complete revolution of the cubic foot dial

Enter the time recorded for one complete revolution (in seconds)

Enter the calorific value of the gas (BTU per cubic foot)

Calculate the cubic feet of gas consumed per hour using the gas rate chart