FRONIUS Welding Power Source TPS 600i

Switch off all devices and components involved and disconnect them from the mains.

Secure all devices and components to prevent unintentional restarting.

Use a suitable measuring instrument to check that electrically charged components have been discharged.

Ensure housing screws provide a suitable ground conductor connection for earthing the housing.

Allow hot components and parts to cool down before working on them.

Switch off all devices and components involved and disconnect them from the mains.

Secure all devices and components to prevent unintentional restarting.

Check that electrically charged components have been discharged using a suitable measuring instrument.

Ground Conductor Connection Check

Verify that housing screws provide a suitable ground conductor connection for earthing the housing.

Ensure housing screws have not been replaced by other screws without a reliable ground conductor connection.

Confirm that hot components and parts have cooled down before working on them.

Switch off all devices and components involved and disconnect them from the mains.

Secure all devices and components to prevent unintentional restarting.

Check that electrically charged components have been discharged using a suitable measuring instrument.

Ensure housing screws provide a suitable ground conductor connection and are not replaced by other screws.

Allow hot components and parts to cool down before working on them.

Clean out the device interior using dry compressed air at reduced pressure.