Epson Multimedia Projector VS350

Warning: Do not use canned air. The gases may leave a flammable residue or push dust and debris into the projector's optics or other sensitive areas.

Turn off the projector and unplug the power cord.

Gently remove the dust using a small vacuum designed for computers or a very soft brush (such as a paintbrush).

Note: You can remove the air filter so you can clean both sides of it. Do not rinse the air filter in water, or use any detergent or solvent to clean it.

If dust is difficult to remove or the air filter is damaged, replace the air filter.

Sign off on the air filter and vents cleaning

Warning: Ensure the projector is turned off and unplugged before starting the procedure.

Is the air filter torn or damaged?

If the air filter is not damaged, stop the procedure.

Upload a photo of the damaged air filter.

Dispose of the used air filter according to local regulations.

Upload a photo of the new air filter in place.

Did the new air filter click into place?

Sign off on the air filter replacement.

Warning: Before cleaning any part of the projector, turn it off and unplug the power cord.

Warning: Never open any cover on the projector, except as specifically explained in this manual. Dangerous electrical voltages in the projector can injure you severely.

Warning: Do not try to service this product yourself, except as specifically explained in this manual. Refer all other servicing to qualified servicers.

Before cleaning the projector case, turn off the projector and unplug the power cord.

Did you use a soft, dry, lint-free cloth to remove dust or dirt?

Did you use a soft cloth moistened with water and mild soap to remove stubborn dirt?

Caution: Do not use wax, alcohol, benzine, paint thinner, or other chemicals to clean the projector case. These can damage the case.

Caution: Do not use canned air, or the gases may leave a flammable residue.

The projector keeps track of the number of hours the lamp is used and displays this information in the projector's menu system.

Replace the lamp as soon as possible when the following occurs:

• The projected image gets darker or starts to deteriorate

• A message appears when you turn on the projector telling you to replace the lamp

• The projector's Lamp light is flashing orange and its power light is flashing blue

Before you replace the lamp, let the projector cool down for at least one hour so the lamp will not be hot.

Warning: Let the lamp fully cool before replacing it to avoid injury.

You can replace the lamp while the projector is mounted to the ceiling, if necessary.

Warning: Before cleaning any part of the projector, turn it off and unplug the power cord.

Warning: Never open any cover on the projector, except as specifically explained in this manual. Dangerous electrical voltages in the projector can injure you severely.

Warning: Do not try to service this product yourself, except as specifically explained in this manual. Refer all other servicing to qualified servicers.

Cleaning the Lens: Clean the projector's lens periodically, or whenever you notice dust or smudges on the surface.

Lens cleaned without using any harsh materials or subjecting the lens to any impacts

Warning: Do not use a lens cleaner that contains flammable gas. The high heat generated by the projector lamp may cause a fire.

Caution: Do not use canned air, or the gases may leave a residue. Avoid touching the lens with your bare hands to prevent fingerprints on or damage to the lens surface.

Sign off on the projector lens cleaning