Epson Multimedia Projector EB-535W

You should clean the projector if it becomes dirty or if the quality of projected images starts to deteriorate.

Before cleaning, turn off the projector's power and unplug the power cable. Otherwise, it could cause an electric shock.

Cleaning the Projector's Surface

Clean the projector's surface by wiping it gently with a soft cloth.

If the projector is particularly dirty, moisten the cloth with water containing a small amount of neutral detergent, and then firmly wring the cloth dry before using it to wipe the projector's surface.

Do not use volatile substances such as wax, alcohol, or thinner to clean the projector's surface. The quality of the case may change or become discolored.

Warning: Ensure the projector's power is off and the power cord is disconnected before starting.

Power off the projector and disconnect the power cord

Dispose of used air filters properly in accordance with your local regulations.

Sign off on the air filter replacement

It is time to replace the lamp when:

The following message is displayed. "Time to replace the lamp. Please contact your Epson projector reseller or visit www.epson.com to purchase." The message is displayed for 30 seconds.

The power indicator is flashing blue, and the lamp indicator is flashing orange.

The projected image gets darker or starts to deteriorate.

The lamp replacement message is set to appear after the following time periods in order to maintain the initial brightness and quality of the projected images.

When Power Consumption is set to Normal: About 4,900 hours

When Power Consumption is set to ECO: About 9900 hours

If you continue to use the lamp after the replacement period has passed, the possibility that the lamp may explode increases.