Enerpac Hand Pump P39

Are coupler halves disconnected?

Use every precaution to guard unit against entrance of dirt because foreign matter may cause pump, cylinder, or valve failure.

Type of roller bearing grease used

WARNING: Always add oil with cylinders fully retracted (extended if pull cylinders) or the system will contain more oil than the reservoir can hold.

1. Remove vent/fill cap from reservoir.

2. Fill reservoir only to level mark shown on pump.

Reservoir filled to level mark?

3. Remove air from system if necessary. Recheck oil level after removing air.

4. Return vent/fill cap to proper position.

Warning: Always use PPE while handling oil

Remove vent/fill cap or plug from reservoir

Fill reservoir only to level mark shown on pump

Replace the vent/fill cap or plug

Sign off on the oil replacement