Domino Printer AX150i

WARNING: Protective equipment such as gloves and glasses must be worn when this procedure is carried out. The air filter may contain hazardous particles.

Air filter replacement is recommended after every 2000 hours of operation but may need to be replaced sooner depending on the operating environment.

Note: The air filter is not designed to be cleaned, it must be replaced.

A new air filter can be ordered through www.buydomino.com

The air filter is located in a slot at the back of the printer. As a user replaceable part it is coloured yellow.

If the printer is on, press and hold the power button for 2 seconds and wait for the printer to shut down.

Remove the air filter by holding the yellow exposed part of the filter and pulling it gently out of the filter housing.

Replace the air filter with a new unit.

Note: Ensure the new air filter is correctly orientated by confirming the arrow symbols on the yellow filter moulding are pointing up. If the filter is inserted upside-down it will get stuck in the printer cabinet.

(1) Protective equipment such as gloves and glasses must be worn when working on or near the printer. Physical contact with ink or make-up can cause skin or eye damage.

(2) If the printer is ever operated in a way that allows it to print into a beaker, the beaker must be made of conducting material and be securely connected to earth (ground), as the electrostatic charges on the ink drops used for printing can cause a fire hazard.

(3) Do not smoke or allow naked flames (or other sources of ignition) in the vicinity of any inks or solvents as this is highly dangerous.

Ink and Make-up Cartridge Replacement

WARNING: Protective equipment such as gloves and glasses must be worn when this procedure is carried out. Physical contact with printer ink or make-up can cause skin or eye damage.

(1) If the make-up cartridge is not replaced when needed, the make-up module will empty and the ink viscosity will go outside the printer’s operating limits.