Turn manuals into instant answers
with your AI-powered assistantTurn manuals into instant answers
with your AI-powered assistant
Get instant access to all the maintenance information you need. Empower technicians to perform preventive maintenance with asset packages, ready to use right out of the box.
Find all the essential guides in one place.
Tensioning Guide
Belt-diagram
C-120 pulleys
+ 13 more
Pre-built workflows to keep your asset running smoothly.
Daily Electrical System Inspection
Replace Roller and Pulley
Install Engine B-120
+ 29 more
Integrate maintenance plans directly into your work orders.
Motion Industries
Applied Industrial Technologies
Electrical Brothers
+ 5 more
Access the parts list for your equipment in MaintainX.
Drive Motor
B2 Rollers
Tensioning System
+ 40 more

The Delfield Company Refrigeration Equipment 6051XL-SH
Create an account to install this asset package.
Integrate maintenance plans directly into your work orders in MaintainX.
Refrigerator Cleaning
Maintenance
Ensure the following safety measures are taken
Clean the interior and exterior using appropriate cleaning solutions
Did you rub with the grain of the stainless steel when cleaning the exterior?
Did you avoid using abrasive cleaners?
Stainless Steel Care and Cleaning
Use appropriate cleaning tools
Did you avoid using steel pads, wire brushes, or scrapers?
Use appropriate cleaning solutions
Gasket Maintenance
Basic Maintenance — Gasket Maintenance
Clean the gasket with warm soapy water
Avoid using full strength cleaning products on the gasket
Ensure no sharp tools or knives are used for cleaning
Check if the gasket needs replacement
Replace the gasket if necessary
1 Monthly Condenser Coil Cleaning
Cleaning the Condenser Coil
Select the cleaning method based on the condition of the coil
Is the condenser coil completely blocked?
Use a de-greasing agent and compressed air if heavy grease is present
Use a commercially available condenser cleaner if extremely dirty
Ensure no high pressure water is used to avoid damage to electrical components
Door Hinge Check
Basic Maintenance — Doors/Hinges
Inspect door hinges for looseness or sagging
Tighten screws on hinge brackets if necessary
Check if the door is properly aligned after tightening
Determine if qualified service is needed for further maintenance
3 Monthly Condenser Coil Cleaning
Cleaning the Condenser Coil
Select the cleaning method based on the coil condition
Ensure no high pressure water is used to avoid damage to electrical components
Clean the condenser fins of dust, dirt, and grease
Was a commercially available condenser cleaner required?
Describe any issues encountered during cleaning
Access the parts list for your equipment in MaintainX.
Door Gasket
1701280
Evap Fan Motor
2162515
Cord & Plug
2183540
Hinge Cartridge
3234225
Spring Hinge
3237509
Door Gasket
1701280
Evap Fan Motor
2162515
Cord & Plug
2183540
Hinge Cartridge
3234225
Spring Hinge
3237509
Door Gasket
1701280
Evap Fan Motor
2162515
Cord & Plug
2183540
Hinge Cartridge
3234225
Spring Hinge
3237509
MaintainX Assist is your expert colleague, on call 24/7, helping your team find the answers they need to keep equipment running.
Reduce Unplanned Downtime
Ensure your team follows consistent procedures to minimize equipment failures and costly delays.
Maximize Asset Availability
Keep your assets running longer and more reliably, with standardized maintenance workflows from OEM manuals.
Lower Maintenance Costs
Turn any technician into an expert to streamline operations, maintain more assets, and reduce overall costs.
Thousands of companies manage their assets with MaintainX













