The Delfield Company Refrigerated Table 18691BUCMP

Perform a Personal Protective Equipment Hazard Assessment

Disconnect electric power at the main power disconnect for all equipment being serviced

Ensure rubber gloves and eye protection (and/or face shield) are worn when using cleaning fluids or chemicals

Avoid the front power switch and the rear power cord when cleaning

Do not use sharp objects or tools to remove ice or frost

Do not use high-pressure water jets or flood the unit with water

Avoid using power cleaning equipment, steel wool, scrapers, or wire brushes on stainless steel or painted surfaces

Ensure the following safety precautions are taken before starting maintenance

Is the power disconnected at the main power supply?

Clean the interior of the unit, avoiding the front power switch and rear power cord

Clean the exterior of the unit, avoiding the front power switch and rear power cord

Check if the door hinges are loose

Tighten screws on hinge brackets if necessary

Perform a Personal Protective Equipment Hazard Assessment

Disconnect electric power at the main power disconnect for all equipment being serviced

Ensure correct polarity of incoming line voltage

Wear appropriate protective gear

Avoid the front power switch and the rear power cord when cleaning

Do not use sharp objects or tools to remove ice or frost

Do not use high-pressure water jets or flood the unit with water

Perform a Personal Protective Equipment Hazard Assessment

Disconnect electric power at the main power disconnect for all equipment being serviced

Ensure correct polarity of incoming line voltage

Wear appropriate protective gear

Avoid the front power switch and the rear power cord when cleaning

Ensure no water or cleaning solutions contact the power switch or power cord

Do not use sharp objects or tools to remove ice or frost

Perform a Personal Protective Equipment Hazard Assessment

Disconnect electric power at the main power disconnect for all equipment being serviced

Ensure correct polarity of incoming line voltage

Avoid cleaning near the front power switch and rear power cord

Avoid using sharp objects or tools to remove ice or frost

Wear rubber gloves and eye protection when using cleaning fluids or chemicals

Do not use high-pressure water jets or power cleaning equipment on stainless steel or painted surfaces