The Delfield Company Refrigerated Table 18672BUCMP

Perform a Personal Protective Equipment Hazard Assessment.

Disconnect electric power at the main power disconnect for all equipment being serviced.

Ensure correct polarity of incoming line voltage.

Avoid the front power switch and the rear power cord when cleaning interior and exterior of unit.

Do not use sharp objects or tools to remove ice or frost.

Wear rubber gloves and eye protection (and/or face shield) when using cleaning fluids or chemicals.

Ensure no high-pressure water jet is used for cleaning.

Perform a Personal Protective Equipment Hazard Assessment.

Disconnect electric power at the main power disconnect for all equipment being serviced.

Ensure rubber gloves and eye protection (and/or face shield) are worn when using cleaning fluids or chemicals.

Avoid the front power switch and the rear power cord when cleaning.

Do not use sharp objects or tools to remove ice or frost.

Do not use high-pressure water jets, power cleaning equipment, steel wool, scrapers, or wire brushes on stainless steel or painted surfaces.

Clean the interior using appropriate cleaning solutions

Perform a Personal Protective Equipment Hazard Assessment

Disconnect electric power at the main power disconnect for all equipment being serviced

Ensure no water or cleaning solutions contact the front power switch and rear power cord

Wear rubber gloves and eye protection when using cleaning fluids or chemicals

Pull the drawer box out until it stops and remove it completely

Clean the track on the bottom of the drawer box using a soft bristle brush

Wipe the track clean of all food and debris

Perform a Personal Protective Equipment Hazard Assessment

Disconnect electric power at the main power disconnect for all equipment being serviced

Ensure rubber gloves and eye protection (and/or face shield) are worn when using cleaning fluids or chemicals

Avoid the front power switch and the rear power cord when cleaning

Do not use sharp objects or tools to remove ice or frost

Avoid using high-pressure water jets or flooding the unit with water

Do not use power cleaning equipment, steel wool, scrapers, or wire brushes on stainless steel or painted surfaces

Perform a Personal Protective Equipment Hazard Assessment

Disconnect electric power at the main power disconnect for all equipment being serviced

Ensure correct polarity of incoming line voltage

Avoid cleaning near the front power switch and rear power cord

Do not use sharp objects or tools to remove ice or frost

Avoid using high-pressure water jets or flooding the unit