Crown Stockpicker SP3220

Harness, tether, snap hooks and mounting points are in good condition

Safety shield is clean and clear

Battery retainers on both sides of the truck are properly installed

All wheels are in good condition

Both forks are secure and not bent, cracked or badly worn

Warning: For trained personnel only. Batteries can be dangerous and produce gas that can explode. They also contain acid that could burn or disfigure you. Never smoke or use an open flame around batteries.

Turn the truck OFF. Check that all controls are in neutral

Use the correct size and weight battery. Never operate a truck that has an underweight or undersize battery installed

Use a roller stand to install or remove a battery. Make sure the roller stand is the same height as the rollers in the truck's battery compartment. Also make sure the roller stand is at least as long as your battery

Never let anything metal touch the top of the cells. Use an insulator (such as plywood) when necessary

Use an approved spreader bar to place a battery on, or remove it from a stand. Make sure you adjust the spreader bar hooks to fit the battery

Replace the battery retainer. Make certain the retainers on both sides of the truck are in place

Connect the battery. Turn the truck ON and check truck operation

DANGER! TRUCK BATTERIES CAN BE DANGEROUS: Your truck battery produces a gas that can explode. It also contains acid that could burn or disfigure you.

Test drive in an uncongested area

Check that the steering is easy and smooth

Drive the truck slowly in both directions

Drive through the full speed range in both forward and reverse

Check braking and plugging distances in forward and reverse

Report any issues to your supervisor

Sign off on the daily stockpicker test