Bunn Bunn Brewer G9-2TDBC G9-2TDBC

Slide plates checked and cleaned

Burrs and grind chamber inspected and cleaned/replaced if necessary

Adjust the burrs and grind time to your specifications for particulate size

Adjust the burrs and grind time to your specifications for throw weight

Sign off on the grinder maintenance

WARNING - Unplug the grinder before the removal of any panel or grind chamber-housing parts

Clean all exterior surfaces using a damp cloth rinsed in any mild, nonabrasive, liquid detergent

Run a few cycles until all coffee in the grind chamber is dispensed and disconnect the grinder from the power source

Remove the upper front inspection panel

Remove the two screws holding the front cover to the burr housing and carefully remove the burr housing front cover

Clean inside surface with a dry stiff non-metallic bristle brush and wipe with a dry clean cloth

Carefully remove the rotor cup, shear plate burr rotor and motor shaft extension from the grinder

Clean all parts with a dry stiff non-metallic bristle brush and wipe with a dry clean cloth