Bunn Brewer 53600.0100

Start from Home screen, then touch the BUNN logo for 2 seconds to enter the Service Access screen

Select the Care and Cleaning icon to prompt the Care and Cleaning buttons

Select the 'Clean Screen' button to deactivate the screen for :15 seconds to permit cleaning

Screen cleaned within :15 seconds?

Prepare a warm soapy solution with nonabrasive, liquid detergent (140° F)

All surfaces on the BUNN equipment wiped down with the solution?

Do NOT clean this equipment with a water jet device

Sign off on the daily brewer cleaning

Loosen screws that secure the front access panel. Remove the panel

Tighten the white shutoff clamp on the long hose between the tank and inlet solenoid

Disconnect the hose clamp and hose from the inlet solenoid

Place the end of the drain hose in a container that has a minimum capacity of [3.5 gallons / 13.25 L Singles] [6.0 gallons / 22.7 L-Twins]

Release the white clamp to drain water from the tank

When tank is empty, replace the hose onto the inlet solenoid, and tighten the clamp

Replace the front panel and tighten the screws

Sign off on the brewer tank maintenance

Smart Funnel® removed and set aside

Peak Extraction® sprayhead unscrewed and set aside

NOTE - Any buildup on the sprayhead may restrict water flow, and impact your coffee brewing. For consistently great coffee, clean sprayheads weekly. Upon visual inspection it may appear that light passes through all holes in the sprayhead plate, but a thin film of residue can pass light and still impede water flow

Sprayhead cleaning tool inserted into the sprayhead and by-pass outlet fitting and rotated several times

Warm soapy solution prepared with nonabrasive, liquid detergent (140' F)

Sprayhead panel wiped down with a clean, damp cloth wetted in the solution

Peak Extraction sprayhead disassembled by removing the black seal

All individual sprayhead parts submerged and washed in the solution