

Turn manuals into instant answers
with your AI-powered assistantTurn manuals into instant answers
with your AI-powered assistant
Get instant access to all the maintenance information you need. Empower technicians to perform preventive maintenance with asset packages, ready to use right out of the box.
Find all the essential guides in one place.
Tensioning Guide
Belt-diagram
C-120 pulleys
+ 13 more
Pre-built workflows to keep your asset running smoothly.
Daily Electrical System Inspection
Replace Roller and Pulley
Install Engine B-120
+ 29 more
Integrate maintenance plans directly into your work orders.
Motion Industries
Applied Industrial Technologies
Electrical Brothers
+ 5 more
Access the parts list for your equipment in MaintainX.
Drive Motor
B2 Rollers
Tensioning System
+ 40 more

BT Industries AB Hand Pallet Truck LHM230Q
Create an account to install this asset package.
Integrate maintenance plans directly into your work orders in MaintainX.
Thrust Bearing Replacement
Disassembly
Remove the steering wheel
Remove the steering wheel shaft using a plastic hammer or rubber mallet
Remove the following components
Reassembly
Reassemble components in reverse order
Ensure the bearing is facing the right way
Final Steps
Lubricate the bearing
Fork Wheel Replacement
Disassembly
Remove the spiral pin and shaft
Remove the wheel
Reassembly
Reassemble the wheel and shaft in reverse order
Post Replacement Check
Ensure the wheel is securely attached
Is the wheel functioning properly after replacement?
Steering Wheel Shaft Replacement
Steering Wheel Removal
Remove the steering wheel
Shaft Preparation
Sand off the paint on one side of the shaft to simplify removal
Shaft and Pin Removal
Remove the spiral pin and shaft
Use a plastic hammer or rubber mallet to tap out the shaft to prevent the risk of damaging the locking ring groove
New Shaft Installation
Fit a new shaft
Press Roller and Valve Rod Replacement
Disconnection and Removal
Disconnect the tow bar from the hydraulics
Remove the shaft and spiral pin holding the press roller
Remove the press roller
Unhook the valve rod from the lowering arm and pull it out
Installation and Adjustment
Fit a new valve rod
Check that the valve rod is correctly positioned around the lowering arm
Open the handle cover to check valve rod positioning, if necessary
Pivot Pipe Replacement
Disassembly
Remove the spiral pin and pivot pipe shaft
Turn the chassis upside down
Remove the pressure rod by the pivot pipe
Reassembly
Reassemble all parts in reverse order
Access the parts list for your equipment in MaintainX.
BT Hydraulic Oil 32, 1 litre, ISO-VG32 Quality Level: ISO 6743-4 Category HM, DIN 51524 Part 2 Category HLP
233328-001
BT Hydraulic Oil 32, 5 litres ISO-VG32 Quality Level: ISO 6743-4 Category HM, DIN 51524 Part 2 Category HLP
233328-002
OKQ8 Rubens WB Grease
213366
Statoil 131 Hydraulic Oil, 1 litre ISO-VG27.5, Quality Level: ISO 6743-4 Category HV, DIN 51524 Part 3 Category HVLP
233916-001
Statoil 131 Hydraulic Oil, 5 litres ISO-VG27.5, Quality Level: ISO 6743-4 Category HV, DIN 51524 Part 3 Category HVLP
233916-002
BT Hydraulic Oil 32, 1 litre, ISO-VG32 Quality Level: ISO 6743-4 Category HM, DIN 51524 Part 2 Category HLP
233328-001
BT Hydraulic Oil 32, 5 litres ISO-VG32 Quality Level: ISO 6743-4 Category HM, DIN 51524 Part 2 Category HLP
233328-002
OKQ8 Rubens WB Grease
213366
Statoil 131 Hydraulic Oil, 1 litre ISO-VG27.5, Quality Level: ISO 6743-4 Category HV, DIN 51524 Part 3 Category HVLP
233916-001
Statoil 131 Hydraulic Oil, 5 litres ISO-VG27.5, Quality Level: ISO 6743-4 Category HV, DIN 51524 Part 3 Category HVLP
233916-002
BT Hydraulic Oil 32, 1 litre, ISO-VG32 Quality Level: ISO 6743-4 Category HM, DIN 51524 Part 2 Category HLP
233328-001
BT Hydraulic Oil 32, 5 litres ISO-VG32 Quality Level: ISO 6743-4 Category HM, DIN 51524 Part 2 Category HLP
233328-002
OKQ8 Rubens WB Grease
213366
Statoil 131 Hydraulic Oil, 1 litre ISO-VG27.5, Quality Level: ISO 6743-4 Category HV, DIN 51524 Part 3 Category HVLP
233916-001
Statoil 131 Hydraulic Oil, 5 litres ISO-VG27.5, Quality Level: ISO 6743-4 Category HV, DIN 51524 Part 3 Category HVLP
233916-002
MaintainX CoPilot is your expert colleague, on call 24/7, helping your team find the answers they need to keep equipment running.
Reduce Unplanned Downtime
Ensure your team follows consistent procedures to minimize equipment failures and costly delays.
Maximize Asset Availability
Keep your assets running longer and more reliably, with standardized maintenance workflows from OEM manuals.
Lower Maintenance Costs
Turn any technician into an expert to streamline operations, maintain more assets, and reduce overall costs.
Thousands of companies manage their assets with MaintainX













